Email and Windows Message from ThinManager

Did you know you can email and Windows message from ThinManager when unexpected events occur like if a ThinManager Server stops or a Terminal is rebooted? Here's how:

Click on Edit and Modify while at the ThinManager server.

Through the wizard, you'll be met with the Event Selection page. Here, you'll specify which events warrant notification.

Each can be sent out via email or Microsoft Messenger. The following page sets up the SMTP server, email addresses, and terminals to Windows message.

One thing to note is the SMTP server specified in ThinManager doesn't include username and passwords so a proxy email server must be created on the network.

What is PacsAnalyzer?

PacsAnalyzer is a handy utility from GE that is used to collect Module Information, Faults, and Station Manager Data through Ethernet or Serial connections.

PacsAnalyzer is compatible with the following CPUs:

• All PACs CPUs (RX3i and RX7i) and RX3i ENIU


• Series 90-70


• Series 90-30, including CPU374/372


• VersaMax modular PLC and Nano/Micro

Step 1: Enter IP address of the PLC rack or select Serial and click Setup.
Step 2: Click Browse next to Output

Step 3: Choose a name and location for the text file that will contain all of the Module Information, Faults and Station Manager Data.

Step 4: Verify ETM Analysis is checked. If there are additional Ethernet modules in the rack, click Add IP addresses and add them there.

Step 5: Click Get Data at the bottom of the window.

Your output file should look like this. Email this to your Logic tech support engineer.

The link to download this file from GE:

http://support.ge-ip.com/support/index?page=kbchannel&id=S:KB13101&actp=search

http://www.logic-control.com/ftp/GE/pac_analyzer.zip