Tech Tip: Setting the IP Address of a GE IP Controller Using Machine Edition

Assigning an IP Address to a GE IP CPU or Network Controller does not require a serial cable!  Built in to Proficy Machine Edition is the "Set Temporary IP Address" tool which is free and easy to use.

Step 1: Ensure the Navigator is open.
Step 2: Click on the Utilities tab at the bottom of the navigator (circled above).
Step 3: Double click on Set Temporary IP Address.

Step 4: Type in the 12-digit MAC address located on the side or front of the CPU or Network module.
Step 5: Type in the desired IPv4 address.
Step 6: Click Set IP.

Step 6: Click OK and wait for the confirmation dialog.